Below: Then we can see that this type of crimping joint is more convenient for this transmission to be used in various industries, and it can transfer this medium to that medium, the effect is better, and it can also be used for hoses and hard pipes. delivery. So there is no limitation at present, and there are many manufacturers, so it is beneficial to choose good quality, because this has obvious advantages, and the pressure resistance is relatively strong, which is several times that of ordinary.

For some high-pressure systems, such as this ordinary one, it cannot withstand the pressure, and if there is a sudden burst, the impact force is relatively large. So we can only use this special crimp joint, that's it, and the aging and contamination of this oil will affect the failure of the originals inside, and it will also accelerate the overall aging and wear. Then the dirt in it may be scratched or embedded in the oil seal, and the sealing effect is not good.
Therefore, in this case, this kind of ordinary can not be determined, only the use of this crimp joint has a certain bearing capacity, which can be directly connected, and does not require skewering and welding, the effect is still relatively good pressure test, Vacuum and add refrigerant. Yupu Machinery Co., Ltd. has a wide range of business scope, mainly including flange crimping joints for top parts. The company has a lot of equipment and lathes, has obtained the fam certificate, and passed the quality management solution certification.